our products
 
 
line
 
line
 


Benefits
Fast tight installations
Modification can be done easily after installation
Demountable systems allow for quick access to large work areas above the ceiling
Global compatibility and availability
Cost Control
Sustainable : 100% post consumer recycled content, 100% locally recyclable, global/regional manufacture
 
 
 
CENTRA - WHITE / BLACK
15 MM T GRID SYSTEM FOR
LAY-IN-PLAIN & PERFORATED
MODULE
600 X 600 MM / 600 X 1200 MM
   
Materials -
 
It is made from high quality hot dipped Galvanized Iron (GI) sheet of 0.3 mm thickness with 120gm/sq meter zinc coating.
Capping
0.25mm pre-coated white GI sheet
Angle
0.40mm thick GI pre-coated white (polyester coating) on one side black color/primer on other side.
Dimensions -
Main Runer : 32mmx15mmx3000mm &
Cross T sections : 32mm x 15mm x12 00mm  & 32mm x 15 mm x 600mm
Wall Angles : 22mmx20m mx3050mm
Suspensions -
 
The main runners are suspended at every 1.2m centre to centre by means of a GI wire of 1.5/2.0mm diameter or 4mm rod at every 1.2m and not more than 150mm form the spliced joints. The GI wire is fixed to be soffit by means of a dash faster or by directly fixing to steel structure as the case may be. The last hanger at the end of each main runner should not be more than 450mm from the adjacent wall.
The 1200 Cross T is then attched to the 2 main T section and then the 600 Cross T is filled between 2 sections of 1200 Cross T's.
All level and alignment of the extended grids system should be accurate.